General Safety Instructions
2.16.2
Hydraulic system
•
The hydraulic system is under high pressure.
•
Ensure that the hydraulic hose lines are properly connected.
•
When connecting the hydraulic hose lines, ensure that the
hydraulic system is depressurized on both implement and tractor
sides.
•
It is prohibited to block the operator controls on the tractor, which
are used for hydraulic and electrical movements of components,
e.g. folding, swiveling and pushing movements. The movement
must stop automatically when you release the appropriate
control. This does not apply to equipment movements that:
ο
are continuous or
ο
are automatically locked or
ο
require an open center or pressure position to operate
correctly
•
Before working on the hydraulic system
ο
lower the implement
ο
depressurize the hydraulic system
ο
switch off the tractor engine
ο
apply the parking brake
ο
take out the ignition key
•
Have the hydraulic hose line checked at least once a year by a
specialist for proper functioning.
•
Replace the hydraulic hose line if it is damaged or worn. Only
use AMAZONE original hydraulic hose lines.
•
The hydraulic hose lines should not be used for longer than six
years, including any storage time of maximum two years. Even
with proper storage and approved use, hoses and hose
connections are subject to natural ageing, thus limiting the length
of use. However, it may be possible to specify the length of use
from experience values, in particular when taking the risk
potential into account. In the case of hoses and hose
connections made from thermoplastics, other guide values may
be decisive.
•
Never attempt to plug leaks in hydraulic lines using your hands
or fingers.
Escaping highly pressurized fluid (hydraulic fluid) may penetrate
the skin and enter the body, causing serious injuries!
If you are injured by hydraulic fluid, contact a doctor immediately.
Danger of infection.
•
When searching for leakage points, use appropriate aids to
avoid the serious risk of infection.
26
Catros BAG0110.10 10.19
