Amazone Catros 12003-2TS Operator'S Manual Download Page 50

Page: 50 / 114

Structure and Function

5.8

Rollers

The roller assumes the depth control of the tools.

•

Wedge ring roller KW580

with adjustable scraper.

→

Very well suited for medium soils

•

Wedge ring roller KWM 650

with Matrix profile and adjustable scraper.

→

Very well suited for light, medium and heavy
soils.

•

Cage roller SW600

→

The cage roller can be used where lighter
reconsolidation of the soil is required.

→

Disposes of a very good self-propulsion.

•

U- profile roller UW580

→

Very well suited for light soils.

→

Resistant to clogging and good load-
bearing capacity.

•

Disc roller DW600

→

Very well suited for light, medium and heavy
soils.

•

Provides very good crumbling.

→

Resistant to clogging and sticking, offers a
good load-bearing capacity.

Catros BAG0110.10 10.19

Summary of Contents for Catros 12003-2TS



















































































































Search results

Summary of Contents for Catros 12003-2TS

Reviews:

Brands by name

Popular brands

Amazone Catros 12003-2TS, Operator'S Manual

Search results

Summary of Contents for Catros 12003-2TS

Reviews:

Brands by name

Popular brands