Connecting and disconnecting the implement
Uncoupling the lower link hitch
1. Secure the tractor against unintentional rolling. For this purpose,
see page 68.
2. Remove both jacks and mount them on the parking position.
3. Park the implement on the jacks using the tractor lower link.
4. Apply the parking brake.
5. Position the wheel chocks.
6. Disconnect the supply lines.
7. Release the lower links.
8. Unlock and uncouple the lower link hooks from the tractor cab.
7.2
Coupling the towing eye/ball bracket
Coupling the towing eye/ball bracket
1. Direct people out of the danger area between the tractor and
implement before you approach the implement with the tractor.
2. Drive the tractor in reverse towards the implement so that the
coupling device can be coupled.
3. Secure the tractor against unintentional start-up and uninten-
tional rolling.
4. Couple the supply lines with the tractor.
5. Check that the stop tap for the disc array is closed.
6. Open both stop taps on the drawbar hydraulic cylinder.
7. Activate tractor control unit
green
.
7.1 Lower the drawbar and attach the coupling device with the
tractor.
7.2 Lift the drawbar.
8. Remove both jacks and mount them on the side of the drawbar.
9. Disengage parking brake.
10. Remove wheel chocks.
11. Activate tractor control unit
green
.
→
Lower the implement using the drawbar until the implement
height is lower than 4 m.
12. Activate tractor control unit
blue
.
→
Fold in – brace the sections against each other.
13. Perform a visual inspection of the section locking mechanism.
14. Close both stop taps on the drawbar hydraulic cylinder.
Catros BAG0110.10 10.19
73
