22
EN
• In AC voltage measurement mode, press the
Hz/%
button (I) twice.
%
(percent) lights up.
• Connect the test probes (N) in parallel to the
circuit or component being measured.
• The stabilized value on the display (A) is read as
the actual reading.
Voltage measurements (mV)
• Set the function switch (E) to the
mV Hz %
position.
• Press the
MODE
button (D) to switch between
AC and DC mode.
AC
(13) or
DC
(14) lights up.
• Insert the black connector lead (N) into the
negative
COM
input jack (L)
• Insert the red connector lead (N) into the
positive
input jack (K).
