19
EN
• The stabilized value on the display (A) is read as
the actual reading.
AC voltage measurement
CAUTION
Risk of electric shock!
The
contact plates of powered AC outlets may be
recessed too deep for the test probes (N) to reach.
This may give false measurements. Contact point
of measurement must be visible for a true reading.
NOTICE
Doing voltage measurements while
the + connector lead (N) is left on the ampere input
jacks (F, G) will blow the product’s internal fuse if
it draws a current greater than the internal fuses
current rating. Check that the (+) red connector
lead (N) is on the correct terminal.
NOTICE
Risk of damage!
Do not measure
motors with unstable power. Large voltage surges
may occur that can damage the product.
