30
EN
• Set the function switch (E) to the
Ω
CAP
position.
• Insert the black connector lead (N) into the
negative
COM
input jack (L).
• Insert the red connector lead (N) into the
positive
input jack (K).
• Press the
MODE
button (D) 3 times to switch
to capacitance measurement mode.
nF
should
light up as the unit (2).
• Place the test probes (N) across the capacitor
under test.
• The stabilized value on the display (A) is read as
the actual reading.
NOTICE
The test may take up to 3 minutes or
more for large capacitors to charge.
