DSP608
– DSP608D
Jan 2017
23
Amate Audio
8 TROUBLESHOOTING
8.1 How to perform a firmware upgrade
To perform a firmware upgrade, proceed as following:
WARNING:
In the Firmware Upgrade Process all your presets will be erased. Please
make a backup of them before upgrading the unit. During the upgrade process you
will be asked to perform this backup.
1. Connect the unit to the computer
2. Using DSPLink, enter the Device Main Window
3.
Choose “Hardware > Enter Password”
4. Enter the admin
istrator password, which is “Ad_min”
5.
Go to “Hardware > Firmware Upgrade”
6.
Be careful to answer “Yes” if you want your settings and presets to be backed
up
7. Wait until firmware is upgraded. Do not plug off or disconnect the unit from the
computer during this process.
8. Your presets will be restored automatically
8.2 Password recovery
The unit is shipped unlocked, so no password will be necessary unless the unit is
locked by the user. The default user password is “Password”.
In case this Password has been changed by
the user (Using the Menu “Hardware >
Configure > Change Password”) and is no longer remembered, a Firmware Upgrade
is needed to re-establish the password to the default value (see previous section).
Summary of Contents for DSP608
Page 1: ...User s manual DSP608 DSP608D January 2017...
Page 25: ......
