Amate Audio DSP608, User Manual

Page: 13 / 26

DSP608
– DSP608D
Jan 2017
13
Amate Audio
Second, press the rotary knob and select from the available types and slopes:
Type: Butterworth, Slopes: 6dB, 12dB, 18dB or 24dB
Type: Bessel. Slopes: 6dB, 12dB, 18dB or 24dB
Type: Linkwitz-Riley. Slope: 12dB or 24dB
5.2.5 Parametric EQ
Select between one of the 10 available Equalizers on each output channel by using
the keys
< Select and Select > . Browse the parameters by turning the rotary knob
and push the knob to select and confirm the values. The following parameters can
be adjusted for each EQ:
•
Freq - EQ center frequency.
•
Gain - EQ level gain.
•
Q - EQ Bandwidth. For shelving filters the Q sets the transition in dB/Oct.
•
Type - Shape of EQ. The available types are:
Bell: Modifies the gain of a certain frequency range, with bell shape
Notch: Eliminates a range around a center frequency
Low-Shelf: Modifies the gain of all the range below a selected frequency.
High-Shelf: Modifies the gain of all the range above a selected frequency.
All Pass: Modifies the phase response, without influencing the frequency response.
Band Pass: Filters out all the range except the defined band.
High Pass: Filters out all the range below a certain frequency.
Low Pass: Filters out all the range above a certain frequency.
•
Enabled
– When set On, the currently selected EQ is on line.
5.2.6 Dynamics Compressor
A true RMS compressor can be set to avoid the output signal go above a certain
RMS value. The following parameters can be adjusted:
•
Thr. - Compressor Threshold. Sets the level at which the compressor will activate.
Q: 2.36
Out12 PEQ 1
Enabled: On
Out12 PEQ 1
Type: BUT 24dB
Out12 HighPass
XOver
Freq: 40Hz
Out12 HighPass
XOver
Type: Bell
Out12 PEQ 1
Freq: 1000Hz
Out12 PEQ 1
Gain: 0.00dB
Out12 PEQ 1