Amano PIX-28, Operation Manual

Page: 27 / 32

Amano PIX-28
23
Diagnostics
The Diagnostics menu contains the following options:
Sof
d I Displays the firmware version of your PIX-28.
LCd
d 2
Turns all segments of the display on to verify proper LCD
operation.
nPr
d 3
Displays the number of prints. Maximum memory 999,999
print counts. Can be reset using the
Clr
d 4 item.
Clr
d 4
Clear Menu
Code 13: Resets cumulative number of punches printed by
preset Pr-8.
Code 22: Resets ribbon capacity gauge.
Code 32: Clears memory (except cumulative number of
punches).
To Use the Diagnostics Menu:
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P5 flashes in the display. Press the
ENTER button.
2. Press the CHANGE button until
DIA9
I 8
flashes in
the display. Press the ENTER button.
3.
Sof
d I
will flash in the display. To advance to the
next Diagnostics menu selection, press the
CHANGE button. If you wish to check the firmware
version of your PIX-28, press the ENTER button.
The version number will appear in the display. To
clear the display, press the ENTER button. The
display will advance to the LCD Test item.
4. To test the LCD, press the CHANGE button until
LCd
d 2
flashes in the display. Press the ENTER
button. All the segments of the LCD will turn on. To
clear the display, press the ENTER button. The
display will advance to the Print Counter.
5. To check the number of prints performed, press the
CHANGE button until
nPr
d 3 flashes in the display.
Press the ENTER button. The number of prints will
appear in the display. To clear the display, press
the ENTER button.