background image

Amano PIX-28 

11

 

Time (Clock) Setting 

1.  Enter the Program Mode and press the CHANGE 

button. When

  Cioc  

P2

,

 flashes in the display, press 

the ENTER button. 

 

Note: 

Seconds are fixed at 00 and cannot be 

changed. The seconds will start incrementing from 
00 when the ENTER button is pressed.  

 

2.  Press the CHANGE button until the correct minute 

appears, then press the ENTER button. 

 

3.  Press the CHANGE button until the correct hour 

and time of day appears, then press the ENTER 
button.  

 

4.  When the display flashes the correct time, press 

the ENTER button. 

 

5.  When the display flashes 

Cioc  

P2

,

 press the 

CHANGE button to move to the Daylight Saving 
Time Setting or press the PROGRAM button to 
exit the Program Mode. 

 

 

Daylight Saving Time Disable/Enable 

Note: When this setting is set to ON, the clock’s time will automatically 
change for DST. When this setting is set to OFF, the clock’s time will 
not change for DST. The dates to begin and end DST are set in the 
Other Options Menu (See Page 13). 

1.  Enter the Program Mode and press the CHANGE 

button until 

dLS 

 

P3 

 

flashes in the display. Press 

the ENTER button. 

 

2.  Press the CHANGE button to alternate between 

On and Off. 

 

3.  When the display flashes the correct setting, 

press the ENTER button. 

 

4.  When the display flashes 

dLS 

 

P3

,

 press the 

CHANGE button to move to the Quick Set-Up 
Code setting or press the PROGRAM button to 
exit the Program Mode. 

 

 

Summary of Contents for PIX-28

































Reviews: