Amano PIX-28, Operation Manual

Page: 24 / 32

20
Amano PIX-28
Setting the Auto Print
Media (time cards, etc.) are manually inserted into the PIX-28 and
aligned. The PIX-28 can be set to print the imprint on media manually
using the Print button (single prints or multiple prints) or automatically. To
do so, perform the following:
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P 5
flashes in the display. Press the
ENTER button.
2. Press the CHANGE button until
A Pr
I 4
flashes in
the display. Press the ENTER button.
3. Press the CHANGE button until the desired code
appears on the display, and then press the Enter
button. The Auto Print codes are as follows:
Code Mode Description
P on
Auto Print
Will automatically print a single print
when media are inserted.
OFF
Manual Print
Requires you to use the PRINT
button when printing.
P:5 on
Precision Print
Enables you to print multiple or
consecutive prints when holding
down the PRINT button.
4. When the display flashes
A Pr
I 4
, press the
CHANGE button to move to the Leading Zero
Setting, or press the PROGRAM button to exit the
Program Mode.