Amano PIX-28, Operation Manual

Page: 19 / 32

Amano PIX-28
15
To create an imprint using Print Codes:
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P5
flashes in the display. Press the
ENTER button. When
Prn
P11 appears in the
display, press the ENTER button.
2. Press the CHANGE button until
CodE
Pr
appears
in
the display, then press the ENTER button.
3. Press the CHANGE button until the desired
number appears in the fourth position. Press the
ENTER button.
4. Press the CHANGE button until the desired
number appears in the third position. Press the
ENTER button.
5. Press the CHANGE button until the desired
number appears in the second position. Press the
ENTER button.
6. Press the CHANGE button until the desired
number appears in the first position. Press the
ENTER button.
7. When the display flashes all four correct numbers,
press the ENTER button.
8. When the display flashes
Prn
P11
, press the
CHANGE button to move to the Language Setting
or press the PROGRAM button to exit the Program
Mode.
Symbol Printing
Symbol Printing allows you to create a custom imprint using Symbol
Codes. Symbol Codes can be set in any order provided that the total
length of the imprint does not exceed 150 dots or 99% of the maximum
displacement (print length) of the print head. The print length of the print
head is 152 dots or 35 mm (1.4”).
To Create an Imprint Using Symbol Codes:
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P5 flashes in the display. Press the
ENTER button. When
Prn
P11
appears in the
display, press the ENTER button.