Amano PIX-28, Operation Manual

Page: 25 / 32

Amano PIX-28
21
Leading Zero
The PIX-28 can include a leading zero on the imprint before single digit
times and dates. (For example, DEC.
0
6,
0
8:00). As shipped, this feature
is disabled, but can be enabled for your application. To enable/disable
this feature, perform the following:
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P5 flashes in the display. Press the
ENTER button.
2. Press the CHANGE button until
2Er 0
I 5 flashes in
the display. Press the ENTER button.
3. Press the CHANGE button until the desired setting
OFF
(Disable) or
ON
(Enable) flashes in the display,
then press the ENTER button.
4. When the display flashes
2Er 0
I 5
, press the
CHANGE button to move to the Begin Daylight
Saving Time Date Setting, or press the PROGRAM
button to exit the Program Mode.
Begin Daylight Saving Time
This setting defines the start or beginning date of Daylight Saving Time.
Once set, it will automatically adjust every year. You will only need to
program it once. Daylight Saving Time is enabled/disabled in the Main
Programming Menu.
1. Enter the Program Mode and press the CHANGE
button until
0 hr
P5
flashes in the display. Press the
ENTER button.
2. Press the CHANGE button until
bdL
I 6
flashes in
the display. Press the ENTER button.
3. Press the CHANGE button until the correct year
that Daylight Saving Time is set to begin appears
in the display, then press the ENTER button.
4. Press the CHANGE button until the correct day
that Daylight Saving Time is set to begin appears
in the display, then press the ENTER button.
5. Press the CHANGE button until the correct month
that Daylight Saving Time is set to begin appears
in the display, then press the ENTER button.