![background image](http://html1.mh-extra.com/html/amano/mtx-30b-a966/mtx-30b-a966_installation-and-operation-manual_2918232020.webp)
Installation & Operation Guide
Page 19 of 48
Proper Finger Placement
Make sure the fingerprint image captured contains the core part of desired finger, because a fingerprint is the impression of the
friction ridges of all or any part of the finger. Also when enrolling a finger, use a slightly adjusted angle for each finger press, i.e, one
to the center, one inclined slightly to the left, and a third inclined slightly to the right. If these techniques are followed; the success
rate should increase dramatically.
The correct way to place a finger on the sensor is:
The user
’
s finger should completely cover the sensor. The finger should be placed flat and in the center of the sensor. The finger
should cover at least 80% of the sensor as shown below:
Place the finger flat on the center of the sensor surface
The wrong ways to place a finger on the sensor are:
The following hints are provided as suggestions to help obtain a good fingerprint enrollment.
Summary of Contents for MTX-30B/A966
Page 1: ...AMX 301100 Copyright 2012 Amano Cincinnati Inc Printed in U S A Page 1 of 48...
Page 45: ...Installation Operation Guide Page 44 of 48 MTX 30 Bell Wiring DC Bell AC Bell...
Page 47: ...AMX 301100 Copyright 2016 Amano Cincinnati Inc Printed in U S A 09 02 2016...
Page 48: ...AMX 301100 Copyright 2016 Amano Cincinnati Inc Printed in U S A 09 02 2016 www amano com time...