Amano MTX-30B/A966, Installation & Operation Manual

Page: 29 / 48

Installation & Operation Guide Page 28 of 48
Date Fmt : Date Format
Time format: Time format displayed on the initializing interface of fingerprint sensor
Press / to select format. The fingerprint sensor supports ten date format: YY-MM-DD, YY/MM/DD, YY.MM.DD, MM-
DD-YY, MM/DD/YY, MM.DD.YY, DD-MM-YY, DD/MM/YY, DD.MM.YY and YYYYMMDD. Select your desired date format.
Keybeep : Keyboard beep: Press / to set whether the key has sound or not. “Yes”
Voice : Voice prompt: Press / to select whether to give voice prompt or not. The device will give corresponding voice
prompt during operation.
Vol. : Press / to adjust volume.
Recheck Min : It is in the set time range unit (minute). If an employee’s attendance record has been recorded already there, then
the record of a second attendance won’t be saved. (Effective value is 0-60 minutes. 0 means all the records after
verification are saved.)

DATA MANAGEMENT
Delete Att Log : Delete all attendance records.
Delete All : Delete all enrolled employees
’
information, fingerprint and attendance record.
Delete Admin Role : Change all administrators into common users.
Clean Dept. : Delete all Departments
 UPDATE =
ONLY USE IF ADVICED BY AMANO SUPPORT STAFF.

DISPLAY
Display Setup
– allows configuration of the match retry times and password retry times.