Installation & Operation Guide
Page 39 of 48
Time Guardian Communications Module
With Time Guardian open on the host PC, from the tree view, click on the
Communications
module within the Daily Activities group
and the following type of screen should appear for Time Guardian. Note
–
the tree view can look a little different depending upon
which modules are activated and/or whether it is Time Guardian Pro (all modules will be active). The figure below shows the tree
view for Time Guradian with all modules activated.
Time Guardian Tree View
Locations are selected by clicking on the desired row . You can select multiple locations by holding down the Ctrl or Shift Key and
clicking on other locations. Also, you can sort the displayed Locations list by clicking on the dropdown list in the upper left-hand
corner and selecting on; Name, Description, Term Type, TZ Offset, Connection, IP, Port, COM Port, Baud Rate, Modem, and Phone.
Once the location is selected use the following commands found at the bottom of the screen to communicate with the connected
MTX-30 terminal(s) at that location:
You also have the option to select specific terminals within a location, double-click on the desired location row, and the following
Communications dialog will appear:
Summary of Contents for MTX-30B/A966
Page 1: ...AMX 301100 Copyright 2012 Amano Cincinnati Inc Printed in U S A Page 1 of 48...
Page 45: ...Installation Operation Guide Page 44 of 48 MTX 30 Bell Wiring DC Bell AC Bell...
Page 47: ...AMX 301100 Copyright 2016 Amano Cincinnati Inc Printed in U S A 09 02 2016...
Page 48: ...AMX 301100 Copyright 2016 Amano Cincinnati Inc Printed in U S A 09 02 2016 www amano com time...
