MTX-15
Page
11
4. Once the default time is displayed, swipe a badge. The badge number
will be displayed at the top of the screen.
5. Please insert the Time Guardian or Time Guardian Pro Software CD
into the CD-ROM drive of your PC to install the software.
Troubleshooting and Configuration
In addition to a system diagnostic that runs during power up, the MTX-15
has an internal diagnostic utility for verifying the correct operation of the
terminal, adjusting the display contrast and configuring network
communications (Ethernet terminals only). To access diagnostics, press
the
Enter
key when the Memory Bank test appears. After the terminal
initializes, the Diagnostic screen will appear:
Use the Function keys (as indicated at the bottom of the display) to
highlight the desired test and press
Enter
on the keyboard to advance to
the test screen. Use the left function key to exit diagnostics.
Relay, Keypad, LED and Buzzer Test
Use the Function keys to highlight the desired test and press
Enter
to
begin.
•
Keypad Test:
Pressing any numeric key will display the number on
the Keypad Test line. ESC will indicate “C” and ENTER will display
“E”. The function keys (from left to right) will display “L”,”M”,”N” and
“O”, respectively. Press the “
” function key twice to exit this test.
•
Relay:
Pressing
Enter
will display “ON” and energize the signal relay
(closing the contacts). Pressing enter a second time will display
“OFF” and deactivate the relay.
•
Buzzer:
This will display “ON” and sound the internal buzzer for
approximately one second.
•
Red LED:
Pressing
Enter
will display “ON” and turn the red
“ERROR” LED on for one second, then deactivate the LED and
display “OFF”.
•
Green LED:
Pressing
Enter
will display “ON” and turn the green
“OK” LED on for one second, then deactivate the LED and display
“OFF”.