WT 770 Manual
FEATURES:
•
DCF-77 Radio-controlled Alarm Clock
•
Digitale LCD-display:
-
Indoor temperature in
or
(Temperature Range: 0
to 50
(32
to 122
))
-
Indoor humility (20%-95%)
•
Alarm with Snooze
•
Illuminated hands
•
Light
•
Silent Movement
RESET
Open the battery compartment and install battery (1 x AA Mignon LR06, 1,5V, not included) as correct polarity, ringing one time
then start to zero position.
The second hand start to run and stop at zero position (12:00),then the minute hand and hour hand also run quickly and stop at
zero position(12:00 noon time).
Then it begin to access to initial receiving time signal, it takes maximum 12 minutes. If receiving successfully, the hands will
find the correct time and work normally. (Running condition after the OK receiving)
If the clock still has not set itself after 12 minutes. Repeat setting at a different location by pressing the RESET button.
The dealing of the initial failed receiving
If the signal is bad and the RCC signal can not be received within 12 minutes the clock will exit receiving, but then every
breaking hour the hands will start receiving signal.
