background image

Supervisor

s Operation Manual 

 

7-1 

Chapter 7: The Maintenance Module 

 
To access the Maintenance Module, which configures and maintains the cashier database, press 
the 

Menu

 key from the Normal Transaction Module and press 

F6 Mgmt

 to access the Management 

menu. Pressing 

F2 Maint

 will load the Maintenance Module.  

 

 

 
This database contains general information about each cashier such as Pin Code, address and 
social security number. In addition, each individuals access rights to specific Fee Computer 
functions are assigned here. 
 
The 

Explorer Window

 is a tree based menu structure of rate components, similar to Windows 

Explorer. Selected parameters in this menu will be displayed in the 

Edit Window

 for modification. 

 
The 

Status Bar

 indicates the project currently loaded. 

 

Tool Bar 

For most operations, all regular functions can be selected from the Tool Bar.  
 

• 

Add  :

 When the top level (Cashiers) selection is highlighted in the Explorer Window, a new 

cashier will be added. 

• 

Save 

Saves the current configuration (displayed in the Status Bar) being worked on as a 

draft. This will not change the current Exported configuration being used by the Fee Computer. 

• 

Reload  :

 Reloads the configuration since the last Save. 

• 

Delete 

:

 When a cashier is highlighted, this button will delete that selection. 

• 

Export 

:

 Saves the loaded configuration as a functioning configuration that will be used by the 

Fee Computer(s) while operating. 

• 

Close  :

 Exits the Configuration Utility. 

 

Summary of Contents for AGP-5200 Series



























































































Reviews: