Handling the Packaged Machine
Since the packaging elements (plastic bags, staples, etc.) are a potential
source of danger, they should not be left within the reach of children, disabled
persons, etc. The gross weight of the appliance, including packaging, is 36
lbs (16 Kg).
WARNING:
Move the packaged product in accordance with legal
legislation requirements regarding accident prevention, the size and
the mass of the packaging itself.
Unpacking the Machine
The procedure for removing the device from its packaging is the following:
1. Open the outer box.
2. Remove the accessories from the box.
3. Remove the vacuum head from its support and rest it carefully on the ground.
WARNING:
you are advised to always wear protective gloves, to avoid the risk of serious injury to your hands.
4. Remove the cardboard holding the vacuum head in position.
5. Remove the vacuum hose from the collection tank.
6. Take the machine out of the box, taking care not to damage either of them.
NOTICE:
You are advised to keep all the packaging elements for any future transportation of the machine.
Transport Machine
To transport the machine, proceed as follows:
1. Check that the collection tank is empty, and empty it if necessary (see
section “
EMPTYING THE COLLECTION TANK
”).
2. Press the button (1) in the vacuum nozzle and pull on the vacuum
hose (2) to remove it from the collection tank.
WARNING:
Users are advised to always wear protective gloves, to
avoid the risk of serious injury to hands.
3. Insert the machine in the box, taking care not to damage either of
them. Remember to place the machine wheel restraint in the bottom
of the box.
4. Wind the vacuum hose around the collection tank.
5. Close the box.
A
16.9 in (430 mm)
B
17.9 in (455 mm)
C
35.8 in (910 mm)
9
Summary of Contents for A-VAC 12 07212A
