background image

TO QUALIFY FOR THIS WARRANTY

(1)  Machine must be registered at the time of 

purchase on a form provided by American 

Sanders. Your American Sanders Distributor is 

responsible for the registration of your machine. 

Please cooperate with your Distributor in supplying 

necessary information on the card.

(2)  The machine must have been purchased from 

American Sanders or an authorized American 

Sanders Distributor.

(3)  This warranty extends to the original purchaser 

only and is not transferable to subsequent owners.

TIME PERIODS

(1)  ONE (1) YEAR WARRANTY - For the 07212A.

Warranted to be free from defects in material and 

workmanship for a period of one (1) year from 

the date of purchase by the original owners. (See 

Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1) Parts that fail through normal wear by reason of 

their characteristics (cords, hoses, & etc.).

(2) This warranty does not extend to parts affected by 

misuse, neglect, abuse or improper maintenance. 

All defective parts must be returned to the 

distributor for credit.

THE OBLIGATION OF AMERICAN SANDERS

(1)  The obligation of American Sanders under this 

warranty is limited to repairing or replacing, at its 

option, any part which is proven to be defective in 

material or workmanship under normal use for the 

applicable period stated above.

(2)  Warranty repairs will be made by your American 

Sanders Distributor without charge for parts and 

labor. They will be compensated with a warranty 

labor rate of $45.00 per hour, for the first year of 

ownership.

(3)  Parts repaired or replaced under this warranty are 

warranted only during the balance of the original 

warranty period. All defective parts replaced under 

these warranties become the property of American 

Sanders.

WARRANTY SERVICE

To obtain warranty service, take your machine and 

proof of purchase to any authorized American Sanders 

Distributor.  American Sanders will not reimburse 

expenses for service calls or travel. For the Distributor 

in your area, call American Sanders Customer Service 

Department at 800-367-3550 or 336-372-8080. If you 

are dissatisfied with the service that you receive, call or 

write American Sanders Customer Service Department 

for further assistance.

INSTRUCTIONS AND CONDITIONS FOR WARRANTY 

REIMBURSEMENT

Order replacement part: Orders will be processed 

and charged, as normal procedure.

Call American Sanders for R/A number.

You will need the Engine Serial Number, Machine 

Serial Number, and the Machine Model Number.

Parts must be returned, accompanied with the 

R/A number to be eligible for warranty credit.

All Warranty Parts will be shipped prepaid 

UPS Ground, any other method will be at the 

recipients expense.

Freight on any Warranty Part after 30 days must 

be paid for by the Purchaser.

Warranty labor rate is $45.00 per hour.

Credit will be issued upon completion of the 

above steps, at the above rates.

DISCLAIMER OF CONSEQUENTIAL

AMERICAN SANDERS DISCLAIMS ANY 

RESPONSIBILITY FOR LOSS OF USER TIME 

OF THE AMERICAN SANDER MACHINE OR 

ANY OTHER INCIDENTAL OR CONSEQUENTIAL 

DAMAGE EXCEPT AS STATED IN THE WARRANTY 

APPLICABLE TO EACH MACHINE. EXCEPT AS 

STATED IN SUCH WARRANTIES, THE COMPANY 

DOES NOT OTHERWISE WARRANT ANY MACHINE 

AND NO WARRANTY, EXPRESS, IMPLIED OR 

STATUTORY IS MADE BY THE COMPANY.

© 2016 American Sanders

Limited Warranty

AVac12 - 07212A

37

LT074000_A; 021116

Summary of Contents for A-VAC 12 07212A









































Reviews: