background image

4

Purpose & Content of the Manual

The aim of this manual is to provide customers with all the information needed to use the appliance in the safest, 

most appropriate and most autonomous way. It includes information concerning technical aspects, safety, operation, 

appliance downtime, maintenance, spare parts and scrapping. Operators and qualified technicians must read the 

instructions in this manual carefully before carrying out any operation on the appliance. If in doubt about the correct 

interpretation of instructions, contact your nearest Customer Service Center to obtain the necessary clarifications.

Target Group

This manual is aimed at operators and qualified technicians responsible for appliance maintenance. Operators must 

not perform operations that should be carried out by qualified technicians. American Sanders cannot be held liable 

for damages resulting from failure to comply with this prohibition.

Manual Storage

The Use and Maintenance Manual must be stored, protected from liquids and anything else that could compromise 

its legibility.

Symbols Used in the Manual

Open book symbol:

Tells the operator to read the manual before using the appliance.

Open book symbol:

Tells the operator to read the manual before using the appliance.

Covered place symbol:

the operations preceded by this symbol must always be carried out in a dry, covered area.

Warning symbol:

Carefully read the sections marked with this symbol and observe the indications, for the safety of the 

operator and the appliance.

Disposal symbol:

carefully read the sections marked with this symbol for disposing of the appliance.

Protective gloves symbol:

Always wear protective gloves, to avoid the risk of serious injury to your hands caused by sharp objects.

Protective gloves symbol:

Always wear protective gloves, to avoid the risk of serious injury to your hands caused by chemical agents.

Information symbol:

Indicates additional information for the operator, to improve the use of the device.

The descriptions contained in this document are not binding. The company therefore reserves the right to make any 

modifications at any time to elements, details, or accessory supply, as considered necessary for reasons of improvement 

or manufacturing/commercial requirements. The reproduction, even partial, of the text and drawings contained in this 

document is prohibited by law.

American Sanders reserves the right to make any technical and/or supply modifications. The images are 

shown as a reference only, and are not binding as to the actual design and/or equipment.

Summary of Contents for A-VAC 12 07212A









































Reviews: