background image

7

CAUTION:

l

 

Carefully read the warnings contained in this booklet and take care of it for further consultations

.

l

  Since the packaging elements (plastic bags, staples, etc.) are a source of danger they should not be left within 

the reach of children, disabled persons, etc.

l

  This appliance should only use for the purpose for which it was constructed, namely: cleaning inert surfaces, the 

aspiration of solid non-flammable and non-explosive substances. Any other use is considered incorrect and hence 

dangerous.

l

  When the appliance is operating do not bring it close to delicate organs like ears, mouth, eyes, etc.

This appliance should not be used by people (including children) with physical, sensory or mental disabilities, or 

by people with little experience or know-how, unless they have been controlled and instructed in the use of the 

appliance by people responsible for their safety.

Children must be supervised to ensure they do not play with the appliance.

Carefully read the labels on the appliance. Do not cover them for any reason and replace them immediately if 

they become damaged.

The appliance must be only used by authorised, trained personnel.

Do not use the appliance on surfaces with an inclination greater than the one shown on the serial number plate

The appliance is not suitable for cleaning rough or uneven floors. Do not use the appliance on slopes.

It is necessary to make sure that the power supply cable or the extension cable do not suffer any damage caused 

by the vehicle wheels when moving, by crushing, tearing or the like. Protect the cable from heat, oil and sharp 

edges. Regularly check the power cable for any damage such as the formation of cracks, or ageing. If you notice 

any damage, the cable must be replaced before using the machine.

In the event of danger, immediately remove the plug from the electrical outlet or socket.

For maintenance work, switch off the appliance using the main switches and remove the power cable plug from 

the electrical outlet.

When using the appliance, pay attention to other people and especially to children.

Use only the accessories recommended by American Sanders Authorized Distributors. The use of other 

accessories could compromise the safety of the appliance.

l

 

When the appliance is not being used, it should not be left connected to the electrical outlet and/or power supply.

l

  Before doing any maintenance work on the appliance pull out the plug from the electrical outlet and/or power 

supply.

l

  Do not immerse the appliance in water, do not use solvents.

l

  For scrapping, follow the regulations in force in the country.

l

  Do not use the appliance with the power cable twisted around any part of the appliance.

l

  Before connecting the appliance to the electricity socket, make sure the electrical information on the serial 

number plate corresponds to that of the electrical supply. The appliance must only be powered with a voltage 

equal to that shown on the serial number plate.

When the accessory is operating do not bring it close to delicate organs like ears, mouth, eyes, etc.

l

  The manufacturer cannot be held liable for any damage to persons, animal or objects deriving from improper and 

unreasonable use, and in any event not complying with the instructions mentioned above.

GENERAL SAFETY REGULATIONS

The regulations below must be carefully followed in order to avoid harm to the operator and damage to the appliance.

Summary of Contents for A-VAC 12 07212A









































Reviews: