Programming:
Linking the BMV and Charge Controller on Smart Network
Creating The Network
1. When in the Victron Connect App, click on one of your devices.
2. Go to “Settings” (shown as a gear symbol in the top right, picture 1).
3. Go to “VE.Smart networking” (picture 2).
4. Go to “Create Network” (picture 3).
5. Enter a name for your network (picture 4).
Linking Each Device:
1. Enter the Victron Connect App and click on a device.
2. Go to “Settings” (shown as a gear symbol in the top right, picture 1).
3. Go to “VE.Smart networking” (picture 2)
4. Go to “Join Existing Network” (picture 3)
5. Select the network you just created (picture 5).
6. This device is now joined to the network (picture 7). Repeat this step for every other bluetooth enabled device.
1
2
3
4
5
7
Rev.20190923
