Programming:
The MPPT Charge Controller for Lifeblue Lithium Batteries
Programming / Commissioning Your System - The Charge Controller
Charge Control Settings for LifeBlue
Lithium Batteries:
1. Download the “VictronConnect” App to your phone.
2. Open the App.
3. You’ll see a selection for your SmartSolar MPPT Charger,
select it.
4. Type
000000
to login for the first time.
NOTE: To change the PIN code, go back one step to the
main screen. Click on the 3 buttons to the right of the
controller image, and select “Reset PIN Code”.
5. Click on the
gear
in the top right corner.
6. Click on “Battery”.
7. Click on the settings and adjust them accordingly to match
below:
- Battery voltage: 12V
- Max charge current: 30A (In this example)
- Use default charge settings: OFF
- Charger enabled: ON
- Battery Preset: User defined
- Expert Mode: ON
- Absorption voltage: 14.40 V
- Float voltage: 13.80 V
- Equalization voltage: 13.80 V
- Absorption Duration: Fixed
- Absorption Time: 00:20 (20 minutes)
- Auto Equalization: Disabled (Off)
- Temperature compensation: Disabled (Off)
13.80V
14.40V
Device List within
VictronConnect
MPPT Charge Controller
Screen
15 Minutes
Lifeblue
AM Solar Inc.
3555 Marcola Rd.
Springfield, OR 97477
541.726.1091
Rev.20190923
Battery Settings Screen
