ALZRC DEVIL X360 Instruction Manual Download Page 3

2

规格说明/重要声明

  SPECIFICATION/IMPORTANT NOTES

规格说明 

SPECIFICATION

 

重要声明 

IMPORTANT NOTES

705mm

805mm

主旋翼直径:

805mm

主旋翼长度:

370mm

尾旋翼直径:

160mm

尾旋翼长度:

62mm

主旋翼主轴直径:

6mm

主旋翼横轴直径:

5mm

尾旋翼主轴直径:

4mm

尾旋翼横轴直径:

34mm

电机尺寸:最大直径

32mm

,最大高度

48mm

电池:

34x34x120mm

Main Rotor Diameter : 805mm
Main Blade Length : 370mm
Tail Rotor Diameter : 160mm
Tail Blade Length : 62mm
Main Shaft Diameter : 6mm
Spindle Shaft Diameter : 5mm
Tail Shaft Diameter : 4mm
Tail Spindle Shaft Diameter : 3mm
Motor Size: Maximum 32mm diameter, maximum height 48mm
Battery Compartment: 34x34x120mm

       遥控直升机属于采用众多高科技技术所设计出来的产品,具有一定危险性。所以产品的使用不当或不熟悉都可能会造成严重伤害甚至死亡,使用之前
请务必详细阅读本说明书。

       

RC helicopter was a product that designed base on variety of high-tech and with a certain dangerous. So it may cause serious injury or even 

death under inappropriate operations. Do read this instruction carefully before operating it and pay more attention to the security. 

       

       任何遥控直升机的使用,制造商和经销商是无法对使用者于零件使用的损耗异常或组装不当所发生的意外负任何责任,本产品是提供给有操作过模型
直升机经验的成人或有一定技术的人员在旁指导于当地合法遥控飞行场飞行,以确保安全无误下操作使用,产品售出后本公司将不负任何操作和使用控制
上的任何性能与安全责任。

       

In the use of RC helicopters, manufacturers and dealers are not in any responsibilities for the accidents caused by the loss of the parts in the 

abnormal operation or improperly assembling of the helicopter. This product is available for the experienced adults who have operated the helicopters 
before and the operators who have the substantial technical staff standing by in the local legitimate remote control flying field to ensure the safety. 
After the sale of the products, ALZRC shall have no responsibilities in the performance and security issues causing in the operations and uses.

       
       模型商品属于高操作技术且为消耗性之商品,如经拆装使用后,会造成若干零件损耗的情况,任何使用情况所造成商品不良或不满意,将无法更换新
产品或退货。

       

RC-model requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result of accidents or 

modifications are not covered by any warrantee and cannot be returned or replace.

       

ALZRC

及其代理机构皆对此产品的组装、维护及使用不具有任何控制力。因此,任何责任皆无法被追溯至本产品的制造者。由此我们默认您同意不向

ALZRC

及其代理机构追究任何在使用本产品过程中所产生的责任。 

       

Neither ALZRC Helicopter Division nor its agents have any control over the assembly, maintenance and use of this product. Therefore, no 

responsibility can be traced back to the manufacturer. You hereby agree to release ALZRC Helicopter Division from any responsibility or liability arising 
from the use of this product.

233mm

101mm

Summary of Contents for DEVIL X360







































Reviews: