ALZRC DEVIL X360, Instruction Manual, Page: 18 / 38

组装说明 ASSEMBLY SECTION
17
马达固定座安装
Installation of Motor Mount
Chapter 26
马达固定座
Motor Mount
Chapter 25
ALZRC - 无刷马达
ALZRC - Brushless Motor
2525 - 1800KV
马达固定座
Motor Mount
24
3
止泄螺丝
Set Screw
M3x3mm
圆头内六角螺丝
Socket Head Screw
M2
. 5x6mm
24
3
垫片
Washer
Φ2
. 5xΦ5 . 8x0.5mm
垫片
Washer
Φ2
. 5xΦ5 . 8x0.5mm
未调整电机齿与斜主齿轮间隙之前，请勿拧紧螺丝。
Do not tighten the screws before adjusting the gap between
motor gear and main gear.
圆头内六角螺丝
Socket Head Screw
M2x5mm
24
3
圆头内六角螺丝
Socket Head Screw
M2x5mm
24
3
第 24 步组装完成
Assembled in Chapter 24
第 25 步组装完成
Assembled in Chapter
25
7075 铝制马达齿轮
7075 Aluminium Motor Gear
安装完成后确认马达齿轮与斜主齿轮持平，如图！
After installation, make sure the motor gear and the main gear
is on a same line, as the figure shows.
通过底板孔位可以直接调节马达螺丝，使用一张纸滚入齿轮间，
可调节齿轮间隙为
0.1mm.
It can be adjusted the motor screws through the hole of bottom
plate. A strip of paper is used to roll into the gears to adjust the
gear's gap to 0.1mm.
底面
Bottom
正面
Front
DX360-G DX360-G