ALZRC DEVIL X360, Instruction Manual, Page: 22 / 38

组装说明 ASSEMBLY SECTION
21
尾齿箱安装
Installation of Tail Case
Chapter 34
第 33 步组装完成
Assembled in Chapter 33
确保尾齿传动皮带与前尾驱动皮带轮为安装正确！
Ensure that the tail belt and the front tail pulley
are installed correctly!
确保尾齿传动皮带与压带轮为安
装正确！
Ensure that the tail belt and belt
idler are installed correctly!
确保尾齿传动皮带与尾旋翼主轴
为安装正确！
Ensure that the tail belt and tail
main shaft are installed correctly!
皮带安装正确后，尾传动总成往后拉紧，
拧紧尾管固定座所有螺丝，注意：尾传动
皮带必须非常紧。
After the belt is installed correctly, pull
back the tail drive assembly and tighten
all the screws. Note: the Tail belt must be
very tight.
拧紧螺丝后，检查尾齿箱是否与机身水平。
After tightening the screw, check whether the
tail case is level with the fuselage.
DX360-J
皮带放入前皮带轮后，拉紧尾传动总成，
用手转动马达，检查皮带是否正确安装。
After put the belt into the front pulley,
tighten the tail system and rotate the
motor with hand, to check whether the
belt is installed correctly.
逆时针
Anti-clockwise
顺时针
Clockwise