ALZRC DEVIL X360, Instruction Manual, Page: 13 / 38

组装说明 ASSEMBLY SECTION
12
90 º
140 º
圆头内六角螺丝
Socket Button Head Screw
M2
. 5x4mm
圆头内六角螺丝
Socket Button Head Screw
M2
. 5x4mm
圆头内六角螺丝
Socket Button Head Screw
M2x6mm
舵机固定片-微型
Servo Washer-Micro
12x4x1.2mm
舵机固定片-微型
Servo Washer-Micro
12x4x1.2mm
舵机固定片
Servo Mount Washer
微型数字金属舵机
Micro Digital Metal Servo
DX360-E
锁尾舵机臂及球头与机身水平垂直，舵机与舵机臂成 140° 角，如
图！
The locked rudder servo arm and linkage ball perpendicular to
the fuselage level, servo arm and servo with 140 ° angle, as the
figure shows.
球头中心位于尾管中心垂线上为最佳位置！如图！
The best position is the center of linkage ball on the center
vertical line of the tail tube, as the figure shows.
微型锁尾舵机安装
Installation of Micro Locked Rudder Servo
螺丝锁入塑胶零件请勿过度拧紧。
Do not over-tighten the screws
into the plastic parts.
第 14 步组装完成
Assembled in Chapter 14