ALZRC DEVIL 380 FAST, Instruction Manual, Page: 8 / 38

7
机身主板
Main Structure
Chapter 7
D380F - D - 1
D380F - C - 1
D380F - D - 1
主轴固定座
Main Shaft Bearing Block
Chapter 5
主轴
Main Shaft
Chapter 6
D380F - D - 1
主轴固定座
Main Shaft Bearing Block
轴承
Bearing
Φ 8xΦ16x5mm
64
8
已经完成组装
AIready Assembled
主轴
Main Shaft
Φ 8x116mm
机身主板
Main Structure
轴承
Bearing
Φ 8xΦ16x5mm
64
8
已经完成组装
AIready Assembled
垫片
Washer
Φ 8x Φ 12x0 . 1mm
拧紧主轴固定座三颗 M2 . 5 螺丝，拧紧后检查主轴间隙，可以
通过加垫片的方式来减少间隙。
Tighten the three M2.5 screw. After tightening, check the
axial play of the main shaft. It is possible to reduce any
axial play by adding washer.
注意：请认真检查，以确保主轴能顺滑转动，如果不顺滑，
可以减少一片垫片，直到主轴确保顺滑。
Note: Check the main shaft carefully to make sure you can
rotate the main shaft smoothly. If you feel too much
friction, you have to remove a washer until the shaft
can rotate smoothly.
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
第 5 步组装完成
Assembled in Chapter 5
第 6 步组装完成
Assembled in Chapter 6
组装说明 ASSEMBLY SECTION