ALZRC DEVIL 380 FAST, Instruction Manual, Page: 30 / 38

29
主旋翼组
Main Rotor Head Assemly
Chapter 47
D380F - A - 1 D380F - A - 2
金属主旋翼固定座
Metal Main Rotor
Housing Set
减震圈
Oring
Φ 6 . 7x8mm
横轴垫圈
Spindle Shaft
Damper Rubber
Φ 5x Φ 10x5 . 1mm
垫片
Washer
Φ 5x Φ 7x0 . 1mm
轴承
Bearing
Φ 5xΦ10x4mm
垫片
Washer
Φ 7 . 5x Φ 10x0 . 5mm
横轴
Spindle Shafts
Φ 5x68mm
推力轴承
Thrust Bearing
Φ 5xΦ10x4mm
半圆头内六角螺丝
Socket Button Head
Collar Screw
M4x8mm
对于强劲 3D 飞行或高转速转动，建议横轴垫圈与轴承之间至少
加一片垫片。大约 20 个起落后，请检查虚位，如果感觉松散，
可以再增加一片垫片。
We recommend assembling with at least one washer
between the damper and bearing for 3D flight or high RPM.
After about 20 flights, please manually check the head
dampening, you can add one 0.1mm washer if the
dampening feels loose.
里面 Inside
减震圈
Oring
横轴垫圈
Spindle Shaft
Damper Rubber
内孔较大的里面
Larger ID Inside
第 46 步组装完成
Assembled in Chapter 46
第 46 步组装完成
Assembled in Chapter 46
64
8
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
24
3
D380F - A - 1
Radius 摇臂 x 2
Radius Arm x 2
Chapter 48
Radius 摇臂
Radius Arm
法兰轴承
Flange Bearing
Φ 2xΦ5x2 . 5mm
法兰轴承
Flange Bearing
Φ 2xΦ5x2 . 5mm
Radius 摇臂组 x 2
Radius Arm Assembly x 2
Chapter 49
D380F - A - 1
Radius 摇臂拉杆
Radius Plastic Arm
垫片
Washer
Φ 2.1x Φ 5x0 . 5mm
圆头内六角螺丝
Socket Button Head Screw
M2x10mm
无需拧紧螺丝 ， 确保拉杆摇摆顺滑。
Tighten with care, the arm must can
be swing smoothly.
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
64
8
第 48 步组装完成
Assembled in Chapter 48
64
8
组装说明 ASSEMBLY SECTION