ALZRC DEVIL 380 FAST, Instruction Manual, Page: 23 / 38

22
尾齿传动皮带安装
Installation Of The Tail Drive Gear Belt
尾管总成安装
Installation Of The Tail Boom
Chapter 37
第 36 步组装完成
Assembled in Chapter 36
第 21 步组装完成
Assembled in Chapter 21
尾管总成安装
Installation Of The Tail Boom
Chapter 38
D380F - J - 1
第 37 步组装完成
Assembled in Chapter 37
尼龙螺丝
Nylon Screw
M8x14mm
六角工具
Special tool
M8
第 38 步组装完成
Assembled in Chapter 38
尾传动总成向前移，
将皮带放入前皮带轮。
Put the tail system forward
and let the tail belt into the
front pulley.
皮带安装正确后，尾传动总成往后拉紧，
拧紧四颗尾管螺丝，注意：尾传动皮带必须非常紧。
If the belt installed correctly, pull the tail system
back and tighten the four tail boom screw.
Note: The driven belt must be really tightened.
逆时针
Anti-clockwise
顺时针
Clockwise
皮带放入前皮带轮后，拉紧尾传动总成，
用手转动马达，检查皮带是否正确安装。
After put the belt into the front pulley,
tighten the tail system and rotate the
motor with hand, to check whether the
belt is installed correctly.
组装说明 ASSEMBLY SECTION