ALZRC DEVIL 380 FAST, Instruction Manual, Page: 17 / 38

16
D380F - L - 1
金属尾旋翼夹座总成
Metal Tail Rotor Holder Set
Chapter 22
尾旋翼控制组滑块
Tail Pitch Slider Set
Chapter 23
D380F - L - 3
金属尾旋翼夹
Metal Tail Rotor Holder
尾旋翼 T 型座
Tail Rotor Hub
轴承
Bearing
Φ 4xΦ7x2.5mm
64
8
已经完成组装
AIready Assembled
金属尾旋翼夹
Metal Tail Rotor Holder
轴承
Bearing
Φ 3xΦ6x2.5mm
64
8
已经完成组装
AIready Assembled
垫片
Washer
Φ 4 . 5x Φ 5 . 9x0 . 5mm
推力轴承
Thrust Bearing
Φ 3xΦ6x2.8mm
垫片
Washer
Φ 2x Φ 4 . 5x0 . 5mm
圆头内六角螺丝
Socket Button Head Screw
M2x6mm
24
3
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
内孔较大 在 里面
Larger ID Inside
组装时，确保尾夹座顺滑，些微干涉将可能导致飞行时
尾动作不顺畅。
Care must be taken during assembly to ensure tail
grips operate smoothly without binding.Any slight
binding may affect tail action during flight.
定期检查更换。
Periodic inspection
and replacement.
无需拧紧螺丝 ， 确保 。 顺畅
Don't over tighten the screw.
尾轴滑套
Tail Shaft Slide
Bushing
64
8
法兰轴承
Flange Bearing
Φ 7xΦ11x3mm
尾旋翼控制组滑块变距环
Tail Pitch Control Ring
金属尾 T 型控制臂
Metal T Type Arm
圆头内六角螺丝
Socket Button Head Screw
M2x6mm
铜套
Collar
Φ 2xΦ3x3.4mm
金属尾旋翼控制组拉杆
Metal Control Link
出厂零件包装如果是已组装品，请务必确认各部件是否
锁紧上胶。
For original manufactory package, If the product is
already assembled by Factory, please check again if
parts are firmly secured and applled with some glue.
已经完成组装
AIready Assembled
请确保摇摆 顺畅
Ensure it can swing
smoothly
请确保旋转 顺畅
Ensure it can rotate
smoothly
请确认安装方向正确。
Ensure the installation
direction is correct.
24
3
24
3
组装说明 ASSEMBLY SECTION