TAS12-EDM & TAS12P-EDM Installation Instructions
PUD4005R1-0
For Assistance: [email protected] +1 (909) 591-8431
Page 17
Perform TAS12 Device Tests (cont.)
1. Press the button for the device test to be performed:
• Print Ticket
- Press this button to print a
test ticket from the integrated thermal printer
(TAS12P-EDM only).
• Activate Relay
- Press this button to test the
turnstile unlocking / locking functionality. After the
turnstile unlocks, rotate the arms. The turnstile
arms will re-lock after the rotation. If the arms
are not rotated, the turnstile will re-lock after 20
seconds.
If the rotation occurs in the entry direction, a
count will appear in
Forward Rotation Count
.
If the rotation occurs in the exit direction, a count
will appear in
Back Rotation Count
.
• Set Green LED On
- Press this button to test the
green attendant notification LED. Press the button
a second time to turn the LED off.
• Set Yellow LED On
- Press this button to test
the yellow attendant notification LED. Press the
button a second time to turn the LED off.
• Set Red LED On
- Press this button to test the
red attendant notification LED. Press the button a
second time to turn the LED off.
2. Press the
Close
button to exit the
Device Tests
submenu and return to the
Operator Functions Menu
.
Fig. 17
