TAS12-EDM & TAS12P-EDM Installation Instructions
PUD4005R1-0
For Assistance: [email protected] +1 (909) 591-8431
Page 13
TAS12 Connection Instructions
TAS12 Inputs
1. Power Input
- Used to supply power to the TAS12.
Plug the 6-pin power connector into the power input (A).
2. Interface Input
- TAS12 RS485 communication.
Plug the 20-pin connector into the interface input (B).
3. Printer Input (TAS12P-EDM Only)
Plug the USB printer cable into a USB port (C or E).
4. Ethernet
(Wired communication only)
Used for communication with local area network.
Plug the Ethernet cable into the Ethernet port (D).
5. Mag Stripe/RFID Reader Input
(Optional for TAS12P-EDM models only)
Plug the mag stripe or RFID reader's USB cable into a USB port (C or E).
NOTE
Ensure turnstile power is OFF before connecting TAS12 cabling.
TAS12 cables are routed to the TAS12 mounting location. Depending on the turnstile options ordered, not all wiring
instructions may be applicable.
A
B
C
D
E
A
B
C
D
E
Fig. 11
Fig. 12
