Supervisor 3000 Installation Instructions
Page 30
For assistance: [email protected] +1 (909) 591-8431 PUD3628R1-2
Finish the Installation
Complete the following steps below only if the primary power, crossover cable, and access control wiring is connected.
1. Replace the lid and secure the lid by tightening the (4) thumbscrews.
2. Replace the cabinet side panels and end panels.
3. Secure the end panels by returning the key to the vertical position.
Post-Installation Checklist
1. Power On
SU3000 boots up successfully.
2. Lane Functionality
User status displays and open / closed status lights are functioning properly.
Auditory alarms are playing back correctly.
Barrier arms move smoothly between the open and closed positions.
3. Access Control Integration
Installed card readers are successfully reading credentials.
Valid credentials are activating the turnstile.
4. Barrier Arm Alignment
Barrier arms are properly aligned in the closed position.
5. Attachment
Barrier arms, cabinet lids, end covers, and base covers are securely fastened to the turnstile.
6. Wipe Down Turnstile
Stainless Steel – Wipe down stainless steel with a damp cloth or use Alvarado's recommended
commercial products (see
SU3000 User Guide
).
Powder Coated - Wipe down power coated surfaces with a damp cloth.
7.
Manuals Handoff
Provide both these
SU3000 Installation Instructions
, and the
SU3000
User Guide
to the project or site manager.
