Supervisor 3000 Installation Instructions
Page 12
For assistance: [email protected] +1 (909) 591-8431 PUD3628R1-2
Side Panel Removal
1. After removing the (2) end panels from a cabinet, remove the (4) side panels. A single side panel is attached using pins and
a Velcro strip. To remove the side panels, carefully pull the bottom-end of the panel towards you to disengage the Velcro and
slide each side panel toward the end of the cabinet until it stops and then pull it up and away from the cabinet. Set the side
panels carefully away from the unit. Be sure to note the where the side panel was removed in order to install it back correctly.
See [Figure 7] for more details.
Removing a
Side Panel
Slide Across
Pins
Lift to Free Side
Panel from Pins
Side Panel
Removed
FIGURE 4.3.0.2 – Removing the Side Panels.
Removing a
Side Panel
Slide Across
Pins
Lift to Free Side
Panel from Pins
Side Panel
Removed
FIGURE 4.3.0.2 – Removing the Side Panels.
Removing a
Side Panel
Slide Across
Pins
Lift to Free Side
Panel from Pins
Side Panel
Removed
FIGURE 4.3.0.2 – Removing the Side Panels.
Removing a
Side Panel
Slide Across
Pins
Lift to Free Side
Panel from Pins
Side Panel
Removed
FIGURE 4.3.0.2 – Removing the Side Panels.
7A
7B
7C
7D
Do not force open the side panels. Use a screwdriver to carefully loosen any tight fitting side panels. Take care when doing this
to prevent damage to the unit. Note the location of the side panel after removing in order to correctly secure it.
NOTE
Fig. 7
Removing Side Panels
Removing a side panel
Pull bottom-end of panel
towards you to disengage
Velcro.
Slide across pins
Lift to free side panel from pins
Side panel removed
