Supervisor 3000 Installation Instructions
PUD3628R1-2
For assistance: [email protected] +1 (909) 591-8431
Page 11
It is assumed that the Pre-Installation Checklist steps are complete.
Pre-Installation Instructions
1. Layout the SU3000 cabinets in the location they will be installed.
2. Unlock each end panel with the key provided. To remove, slide each unlocked end panel up slightly and then pull it away
from the cabinet. See [Figure 6] for more details.
When moving cabinets into place DO NOT attempt to lift the cabinets by the lid as this will damage the lid.
Fig. 6
Removing End Panels
NOTE
NOTE
End Panel Removal
Slide End
Panel Up
Turn Key
Counter-
Clockwise Q
(Left) to Lock.
Turn Key
Clockwise P
(Right) to
Unlock.
FIGURE 4.3.0.1
Slide End
Panel Up
Turn key
counter-
clockwise
(Left) to lock
Turn key
clockwise
(Right) to lock
