- 48 -
x1 BIP
Appuyez sur le bouton “P2”,
vous allez entendre 1 BIP.
x1 BIP
Appuyez sur le bouton “HAUT”,
vous allez entendre 1 BIP.
x1 BIP
Appuyez sur le bouton “P2”,
vous allez entendre 1 BIP.
Le moteur va faire un va et
vient
II – Réglage des fins de courses automatiques
NOTE!
- Pour pouvoir fonctionner en mode automatique, il faut équiper le volet roulant d’attaches rigides et de butées mécaniques sur la lame finale.
- Le moteur
DM45EV/Y – 40/15 ne propose pas la fonctionnalité fins de course automatiques.
Appuyez sur le bouton “HAUT”
Le volet va automatiquement
atteindre la limite haute.
Ensuite il va automatiquement
descendre à la limite basse.
Enfin, il va se repositionner sur
la fin d course haute et se sortir
du mode réglage pour être
opérationnel.
III – Mise à jour automatique des fins de course
NOTE!
- Après réglage, le moteur va automatiquement vérifier ses fins de course tous les 30 cycles sans aucune intervention de l’utilisateur.
- Pour pouvoir fonctionner en mode automatique, il faut équiper le volet roulant d’attaches rigides et de butées mécaniques sur la lame finale.
La mise à jour automatique ne fonctionne que si les fins de courses automatiques sont réglées.
NOTE!
- Pour désactiver cette fonctionalité, répétez la procédure.
Si les fins de course sont réglées,
maintenez le bouton “SET” appuyé
pendant 12 secondes vous allez
entendre 1 BIP.
X1 BIP
Après 6 secondes le moteur va
faire un va et viens.
Après 10 secondes le moteur va
faire un autre va et viens.
Après 12 secondes le moteur va
faire un va et viens et vous allez
entendre 1 BIP.