- 14 -
6
Move the curtain to a comfort
position
In an interval of about two
seconds, press the "STOP"
button five times
After successful setup the motor will
beep 3 times (x3 BIP)
OK
VI – erasing the limit positions
x1 BIP
Press the "P2" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
Press the "DOWN" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
Press the "P2" button
and you will hear an acoustic
signal (x1 BIP)
Motor will make a move
DOWN and UP
5. Function with support or without support
IV – setting the comfortable position
NOTE!
- Before setting a comfortable position it is necessary to previous programming the limit positions.
Move the curtain to a comfort
position
Press and hold
the “STOP”
button for 6 seconds.
Motor will make a move
DOWN and UP
To set a predetermined position
(comfortable) when the curtain is in any other
position please press and hold “STOP” button
till the curtain starts moving to the
comfortable position.
OK
V – erasing the comfortable position
x1 BIP
Press the "P2" button
and you will hear an acoustic
signal (x1 BIP)
Press the "UP" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
Press the "DOWN" button
and you will hear an acoustic
signal (x1 BIP)
x1 BIP
After successful setup motor will do
the acoustic signal:
(x2 BIP) if function without support is active,
(x1 BIP) if function with support is active.
To change the function please repeat
the procedure.
OK