Alu_Rehab Netti III, User Manual

Page: 22 / 36

22
language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007
• The head support bracket is fixed by
tightening the four screws two by two
diagonally so the bracket is fixed with
the same strength divided on the four
screws.
adjusting the head support in depth
:
• Release the locking lever on top of the
vertical bar (A).
• Adjust the head support and fix it in
required position.
adjusting the head support in height:
• Release the locking lever on the head
support adapter (C).
• Adjust the head support and fix it in
required position.
adjusting the head support in angle:
• Release the adjustment wheel at the rear
of the horizontal bar (B).
• Adjust the head support and fix it in
required position.
adjusting the head support sideways:
• The head support adapter can be
moved both to the right and left,
giving the possibility to accomodate
special needs for head support.
• Untighten the four screws holding the
adapter together.
• Move the adapter to the required
position and fix the adapter by
tightening the screws diagonally.
Remember to release the levers
when adjusting the head support.
If the head support stand does
not fit the bracket perfectly the
bracket is probably fixed too tight
or unevenly.
After fitting the head support fix it
properly by tightening the little set
screw in the centre on top of the
head support bracket using an Allen-
key.
If the head support seems to short in
height, it can be turned 180° by
releasing the adjustment wheel at
the rear of the horizontal bar (B) .