Alu_Rehab Netti III, User Manual

Page: 19 / 36

19
language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007 language: English model: Netti III Version: February 2007
6.13 adjusting the velcro
back
• Loosen the straps, and place the back
rest cushion so that user gets room for the
bottom and the integrated lumbar support
in correct position.
• Tighten the straps so that they follow the
curvature of the spine and gives a little
extra support at the top of the sacrum.
6.14 Foot supports
The evelating foot support is angle
adjustable, swingable and removable. It
comes with height- and depth adjustable calf
support. The foot plates are hinged, and can
be angled in fixed positions. As a standard
the foot plates come with a locking bolt
which makes the plates stronger (See picture
page 20) . The bolt can be removed by using a
pair of circlip pliers.
Netti III has the following foot support
alternatives:
• Universal foot support
• Amputation support
See chapter 5 for pictures.
mounting of the foot support:
• Raise the support a few degrees.
• Fold the foot plates up.
• Hold the foot support in the angle on top,
and place it in the pull out piece in an
angle as shown in picture below.
• Swing the foot support inwards and push
slightly downwards until it goes into
locked position.
Height of foot plate:
The foot plates are stepless height adjustable.
• Unfix the adjustment screw so that the
adjustment bar moves freely.
• Adjust the foot plate to required height,
then tighten the screw as shown in picture
on next page.