INSTRUCTIONS FOR HELIO C2, HELIO A7, HELIO A6, MOVE
*
AND HELIO KIDS
*
INSTALLATION INSTRUCTIONS
NEWTON SANITIZING MULTI-PURPOSE POUCH
Material(s) required:
Tool(s) required:
No tools required
1.
Begin by removing the footrest on the desired
side.
2.
On the back side of the pouch, you will find a
vertical Velcro strip with four holes and a hori-
zontal Velcro strip with two holes. The positio-
ning straps can be fed through these holes to
secure the pouch to the chair.
Feed straps through the top and bottom holes
along the Velcro strip.
3.
Then, feed the third strap through the left or
right hole along the horizontal strip.
a. If you are installing the pouch on
the left footrest, feed the strap through
the right hole.
b. If you are installing on the right footrest,
feed through the lef.
4.
Pull the three straps taut until the rings are
close to the Velcro strips.
5.
Holding the pouch up to the footrest, as shown,
feed each strap around the tube and into the
ring. Cinch and press each strap back down
onto itself.
6.
Reattach the footrest to the wheelchair.
Installation steps:
*
MOVE and HELIO KIDS models are not available in the USA.
