- 8 -
eBridge200WPM/WPMH
Fig. 14 - SETUP MENU - Setup Site ID,
Date and TIme Disable/Enable Ports
Fig. 15 - STATUS MENU - Real time unit status
Network Type:
Static IP
User can set a fixed IP for network connection.
DHCP
DHCP server in LAN will automatically assign IP configuration for the network connection.
IP
This field shows the eBridge200WPM/WPMH current IP Address. A static IP address must be set
manually. If DHCP this value will be assigned automatically.
Subnet Mask
This field shows the subnet mask for your network so the eBridge200WPM/WPMH will be recognized
within the network. If DHCP is selected, this value will be assigned automatically.
Inbound Port Port number for HTTP/WEB communication.
Host Name
Name of the eBridge200WPM/WPMH device on the LAN
Additional Information:
1. If using DHCP, all settings will be detected automatically.
While DHCP is a useful tool for determining the network settings, if you set up your eBridge200WPM/WPMH in this
manner its IP address may change at different times for different reasons, particularly after a power failure.
If the IP address of the eBridge200WPM/WPMH changes, you may have difficulties accessing your eBridge200WPM/
WPMH locally and/or remotely. It is strongly recommended that you connect via host name when unit is configured as
DHCP. Please do not set the DHCP address issued to the eBridge200WPM/WPMH by the router as its static
IP address unless you take specific steps that program your router to prevent such address conflicts.
