Altronix eBridge200WPM, Installation Manual

Page: 6 / 12

- 6 - eBridge200WPM/WPMH
15W Cat5e Application:
Fig. 12 - Data/Power Transmission from Headend up to 100m over Cat5e
Cable Type, Total Device Power, Data and Power Distance:
Cable Type
Total Power
Consumption
Max. Data
Distance
Max. Power
Distance
RG59u/23awg 15W 300m 264m
RG59u/23awg 30W 300m 132m
RG59u/23awg 60W 300m 66m
RG59u/22awg 15W 300m 334m
RG59u/22awg 30W 300m 167m
RG59u/22awg 60W 300m 83m
RG59u/20awg 15W 300m 532m
RG59u/20awg 30W 300m 266m
RG59u/20awg 60W 300m 133m
RG59u/18awg 15W 300m 846m
RG59u/18awg 30W 300m 423m
RG59u/18awg 60W 300m 211m
Cat-5e 15W 500m 846m
Cat-5e 30W 500m 423m
Cat-5e 60W 500m 211m
eBridge200WPM/WPMH User Interface and Programming:
Note: A constant PC connection is not required for proper operation and is used as a local programming/monitoring tool only.
Step 1. Set Local Area Connection of your laptop to DHCP mode.
For Windows XP:
a. Open Network Connections by clicking
Start button, then clicking Settings, then clicking Network Connections.
b. Right click the Local Area Connection. Click Properties. Administrator permission required.
If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
c. Double click Internet Protocol (TCP/IP) menu item.
d. Choose the Obtain an IP address automatically option.
e. Click
OK. Close all windows.
For Windows Vista:
a. Open Network Connections by clicking the Start button Picture of the Start button, clicking Control Panel,
clicking Network and Internet, clicking Network and Sharing Center, and then clicking Manage Network
connections.
1
PORT 1 PORT 2
CAT INPUT
COAX INPUT
SPEED ACTIVITY
SW3
SPEED
ACTIVITY
SPEED
ACTIVITY
SPR
PoE
DATA
PoE
SPR
PoE
DATA
PoE
60W CAT
30W CAT
or
60W COAX
SW3
60W CAT
30W CAT
or
60W COAX
Cat5e - 100m
Midspan
or Endspan
CAT-5e - 100m
Option 1
15W Camera/Device
Note: Calculations based off of 56VDC starting
voltage from power source and accounts for a 10VDC
voltage drop. IEEE standards voltage range requirement
for powered devices are:
PoE (15W) - 37VDC to 57VDC
PoE+ (30W) - 44VDC to 57VDC