Altronic The Game of Life, Set Up And Configuration

Page: 49 / 57

49
May 2007
The Game of Life™ / Setup and Configuration (APL based)
CHANGE APL MASTER MACHINE
This section describes how to change the APL master
machine in an APL link. This may be necessary, if the
primary master machine is defective or if the Media
Controller is to be connected to another machine.
1. Open the Jackpot Statistics menu (see section
"Jackpot Statistics") and write down all values.
2. Power down the primary APL master machine.
All machines in the link display "Master not ready"
and will be locked until a new APL master is confi-
gured.
3. Remove the Alink cabling from the primary master
machine and run the Alink cable to the next machi-
ne to close the Alink connection. See section "Cab-
ling" for details.
4. Remove the cabling to the Media Controller and
the OH Displayboard from the commboard of the
primary master machine. If necessary you can now
remove the primary master machine from the floor.
5. Power down the machine which is to be configured
as the new master machine.
6. Set commboard DIP switch S5/4 to ON at the new
master machine. Install the OH Displayboard and
connect the Media Controller as described in sec-
tion "Connect Media Controller".
7. Power up the new master machine.
When the new master machine is up, the entire
link should be operational. If any error message is
displayed, please refer to the section "APL Trou-
bleshooting".
8. Open the Jackpot Statistics menu and verify all
jackpot values.
M
AINTENANCE