Altronic The Game of Life, Set Up And Configuration

Page: 25 / 57

25
May 2007
The Game of Life™ / Setup and Configuration (APL based)
6600xxxx MB U05 8M AT27C080
xxxx xxxxxxxxxxxxxxxxx
HBS-STD-5.1.1.279
Caution
!
Always make sure to
mount the EPROMs
correct. The socket groove
and the EPROM groove have
to point to the same
direction. Wrong insertion
can cause permanent
damage to EPROMs and
boards!
Commboard
Mainboard
Groove
Reset Button
+
P1
U5
U6
U7
U8
U9
U22
SD
U2-F
S1 S2 S3 S4 S6 S7
S5 S8
0
5
1
2
3
4 6
7
8
9
0
5
1
2
3
4 6
7
8
9
0
5
1
2
3
4 6
7
8
9
0
5
1
2
3
4 6
7
8
9
0
5
1
2
3
4 6
7
8
9
0
5
1
2
3
4 6
7
8
9
1 2 3 4 5 6 7 8
ON
1 2 3 4 5 6 7 8
ON
+
P1
U34 U35
LED D19
MACHINE SETUP
RAM Reset Procedure
Important : A RAM reset will clear all
statistical data and machine settings. Make
sure to capture required data and meters
before you carry out the reset procedure.
1. Open the maindoor and switch machine power off.
2. Remove mainboard and commboard.
3. Set up the commboard DIP- and rotary switches,
as described in section "Commboard Setup".
4. Replace the paytable EPROM on mainboard socket
U9 with the RAM reset EPROM "HMB-RRES01".
Replace the commboard EPROMs U34 and U35
with the commboard clear EPROMs "Q-CB-RAM-
CLEAR" U34 and U35.
5. Reinstall mainboard and commboard and switch ma-
chine power on. This step can be carried out with
or without the security device (SD) installed.
6. Wait (at least) until the Atronic logo and a pro-
gress bar is displayed on screen. A flashing LED
(D19) on the commboard confirms that the comm-
board clear was successful.
7. Switch machine power off and remove mainboard
and commboard.
8. Replace RAM reset EPROM U9 with the original
paytable EPROM U9.
Replace commboard clear EPROMs U34 and U35
with original commboard EPROMs U34 and U35.
Check for correct mounting!
10. Mount the security device (SD) to the mainboard,
if previously removed.
11. Reinstall mainboard and commboard and switch ma-
chine power on.
12. Wait approx. 5 minutes until the message PRESS
RESET BUTTON TO CONTINUE WITH FORMATTING
RAM is displayed. Press mainboard reset button.
The RAM reset procedure is now completed and the
machine will automatically enter the Initial Setup.
S
ETUP