Altronic The Game of Life, Set Up And Configuration

Page: 14 / 57

14
May 2007
The Game of Life™ / Setup and Configuration (APL based)
COMMBOARD SETUP
Required Settings
Following commboard settings are required to operate
The Game of Life™ via APL.
Activate APL mode and configure an APL master
machine
1. Set an APL Progressive Address with rotary
switches S1 and S2 on the commboard. Each
machine in the link must have a unique address from
"01" to "32". Address "00" is not valid.
S1: Set APL Progressive Address x10
S2: Set APL Progressive Address x 1
2. Configure commboard DIP switch S5 / 1 - 3.
(on all machines in the link)
Set S5 / 1 to OFF
Set S5 / 2 to ON
Set S5 / 3 to OFF
This activates the APL mode in general (slave mode).
3. Configure one machine in the link as APL master:
Set S5 / 4 to ON
This sets APL master mode and activates the
implemented jackpot controller functionality.
Note
: The Media Controller has to be connected to
the APL master commboard.
On all other (APL slave) commboards S5 / 4 has to
be set to OFF.
APL Master
APL Slave
Commboard 68k
Example
:
To set APL Progressive
Address "15", set S1 to "1" and
S2 to "5"
S
ETUP