Altronic The Game of Life, Set Up And Configuration

Page: 16 / 57

16
May 2007
The Game of Life™ / Setup and Configuration (APL based)
COMMBOARD SETUP
Optional Settings
continued
SAS dual channel communication
This section gives an overview of the SAS dual channel
settings.
1. Set S5 /6 to ON
This enables communication to an online system in
general.
2. Activate SAS Channel 1.
Set rotary switch S7 to "1"
This enables communication on SAS channel 1 on
commboard connectors P12 (RS-232 interface) and
P2 (TTL interface).
3. Activate SAS Channel 2.
Set rotary switch S4 to "1"
This enables communication on SAS channel 2 on
commboard connectors P4 (RS-232 interface) and
P19 (TTL interface).
Special Case :
If you connect to an Atronic fibre optics board that
links to a fibre optics ticketing network (TITO), you
have to set a unique address for SAS channel 2 on
each commboard.
S3: Set Accounting System Address x10
S4: Set Accounting System Address x 1
S
ETUP
Note:
See appendix for a commboard
connectors layout.
Note
:
Address "00" disables a
channel .