manualshive.com logo in svg

Altronic The Game of Life, Set Up And Configuration

Share
Download
Altronic The Game of Life Set Up And Configuration Download Page 48

48

May 2007

The Game of Life™ / Setup and Configuration (APL based)

JACKPOT STATISTICS

This section shows where to find the different pro-

gressive jackpot statistics of an APL link.

Audit Menu/History/Cashless and Progressive/Jack-

pot Statistics

Go to the Cashless and Progressives menu and touch

the 

Jackpot Statistics

 on-screen button to display

the Jackpot Statistics menu. This menu shows several

statistics of the entire APL driven progressive jackpot

link. Use the arrow on-screen button to scroll through

the jackpot levels.

Audit Menu/History/Cashless and Progressive/

Go to the Cashless and Progressives menu and use the

arrow down on-screen button to scroll to page 2. Select

the attendand paid progressives, machine paid progres-

sives or the overall paid progressives statistics for

review.

Audit Menu/History/Money Log/Last 10 Progressives

This menu shows the last 10 progressive jackpot

payouts of a particular machine.

Payout type M = machine paid

Payout type A = attendant paid

Service Menu/Diagnostics/Alink Status

This menu shows the status (Master, Ready, N/A) of

all machines in the link.

Note

: All figures in this pictures are for example only.

M

AINTENANCE

Summary of Contents for The Game of Life


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands